|
Carbide Single Point Tools
Cup wheels:
- roughing (10" & 14" cups)
- finishing or touching up
- ordinary dull tools (wet)
- general purpose finishing (dry)
- combination roughing and
- finishing (wet)
- backing off steel shank up
- to carbide tip
Straight Wheels:
- roughing (dry)
- roughing (wet)
- backing off steel shank up
- to carbide tip
High-Speed Steel & Cast Alloy Single-Point Tools
Bench and pedestal grinders:
- rough
- finish
- combination roughing and finishing
Machine grinding:
- 15" diameter wheels
- 24" diameter wheels
- cup or cylinder wheels – Gisholt
Wet tool grinders:
- up to 20" wheels
- 24" and larger
High-Speed Steel & Cast Alloy Multi-Tooth Cutters
Fellows Gear Shaper cutter
Form cutters (circular)
- dish wheel
Hobs (Barber-Coleman hob grinder)
Sharpening:
7" wheels
10" wheels (large hobs)
Milling cutters (plain, side, face, etc.)
- straight wheel
- cup wheel
Ingersoll Cutter Grinder Reamers
- cylindrical grinding
- backing off
Saws (metal cutting)
- backing off
|
|
High-Speed Steel Grinding Misc.
Broaches
- sharpening (face grinding)
- dish wheel
- backing off cup wheel
Bushings
CPM-10V
Chisel (woodworking)
Dies
- surface grinding – hardened dies:
- straight wheel (dry)
HVTRP
- straight wheel (wet, fast traverse)
- surface grinding – annealed dies:
- straight wheel (dry)
- cylindrical grinding (wet)
- internal grinding (wet)
- offhand grinding:
- straight wheels (coarse)
- mounted wheels (coarse)
- mounted wheels (medium)
- mounted wheels (fine)
Drills
Misc. Toolroom Grinding
Cutting-off tool bitstock, drills, etc.:
- general use
- very hard steel (no burn permitted)
- reinforced
- resharpening
- various numbered sizes
Winslowmatic machine
- web thinning
- pointing
- high production – 5 hp
- high production – 30 hp
- point thinning
- cutting-off (dry)
Taps
- sharpening (tap grinders):
- straight wheel (small taps)
- cup wheel (large taps)
- touching up flutes
|
|
Misc. Toolroom Grinding (Continued)
Thread Chasers
- milled and tapped chasers
- tangent chasers
- circular chasers
Cylindrical grinding:
- high-speed steel
- hardened steel
- soft steel
- stainless steel (No. 300 series)
- cast iron, brass, aluminum
- general purpose wheel
Internal grinding:
- HSS and hardened steel
Superabrasives Section
- soft steel
- cast iron and bronze (soft)
Surface grinding:
- reciprocating table (straight wheel)
|